| Apply at
a rate of 20 litres per hectare in 500 litres water for routine
treatments, or up to 50 litres per hectare (in 800-1000 litres
water) where it is part of major remedial treatment following
severe stress or damage. For treatment of small areas within
larger areas of turf, dilute 1-2 litres in 35 - 50 litres of
water and apply over an area up to 500 square metres.
Apply
as a medium or coarse spray using a hand-held, pedestrian
controlled or vehicle mounted sprayer. Read the label on the
product container for any specific handling instructions.
Product safety data sheets are also available.
Compatibility
These seaweed
products are compatible with most turf treatment chemicals
and fertilisers, although some precipitation may result from
pre-mixing with phosphate or high calcium products. If in
any doubt try a simple jar mixing test and/or consult our
technical support.
The seaweed
extracts possess a degree of natural wetting properties but
if necessary they can be mixed with other proprietary wetting
agents.
Print
this page.
BACK
TO TOP OF PAGE
Back
to previous page / Home |